- Connected scan tool. Found multiple error codes for low voltage and lost communication from 15 out of 22 modules. Tested battery. Found battery low and in need of a recharge. Charged battery overnight and rechecked in the morning, battery passed load test and charging system working normally at this time. Cleared error codes and test drove vehicle.
- Includes: Change engine oil and filter. Check transmission fluid level and adjust as needed. Check coolant condition and pressure check system. Check brake fluid level and condition. Check power steering fluid level and condition. Check belts; coolant, fuel, and vacuum hoses for damage/degradation. Check antenna operation (if applicable). Lube all doors and latches. Tighten door brake fasteners. Lube hood hinges and latch. Check differential fluid level. Check axle boots, CV joints, and/or U-Joints for damage. Check wheel bearings for play. Check parking brake operation. Check for fluid leaks. Check interior and exterior lights. Check wiper and washer jet operation. Check tire wear and condition. Set tire pressures to specification. Vacuum cowl. Check intake and cabin air filters. Test drive vehicle.
- Replace cabin filter element. Reassemble filter housing and access panel.
RONALD G. L. gave our service a 5 star review on 12/3/2021