2009 Honda CR-V
Mileage
139,591
Service Date
4/9/2025
Services Performed
- Remove and reinstall four wheels and rear brake drums (if applicable) to inspect brake condition. Inspect entire system for leaks. Test drive vehicle and check brake operation. Lining remaining is: Front ( 11mm) Rear ( 8mm). Found front brake pads contaminated with grease or anti-squeal paste on friction surface. Also found rear brake rotors have heat glazing present. Recommend resurfacing front rotors and pads to eliminate contamination and recheck system.
- Removed front wheels and brake components. Surfaced rotors with friction discs. Scuffed brake pads and removed all anti-squeal paste from brake pads. Reinstalled cleaned pads and rotors using new hardware. Added anti-squeal paste to backs of brake pads. Reinstalled calipers and wheels. With rear wheels removed, also surfaced rear brake rotors to help eliminate glazing. Test drove vehicle after completion of repairs and maintenance items. No further brake squeal or grinding found at this time.
- Checked vehicle for service and maintenance needs. Engine air filter dirty. Drive belt cracking. Oil level and condition good. Lower control arm bushings cracked and starting to tear. Recommend monitoring for any excess play or clunking noises. Other fluid levels and conditions ok. Battery passed load test. No coolant leaks noted. Found all brake lights inop.
- Removed engine covers and intake piping. Released belt tensioner and removed drive belt from engine. Inspected pulleys and engine accessories for any play, noise, or roughness. Routed new drive belt and released tensioner. Reinstalled intake piping and engine covers.
- Replaced engine air filter.
- Removed both tail light housings and 3rd brake light assembly to access bulbs and check for proper power and ground. Replace bulbs with new units and reinstall lights. Recheck light functions. All exterior lights now working properly.
Shireen J. gave our service a 5 star review on 4/24/2025
