JSON-LD markup generated by Google Structured Data Markup Helper.

Call (805) 965-6142

Go to…

Audi

Home / Audi / Page 2

We Service and Repair all Audi cars

  • 2013 Audi S5

    Audi S5
    Mileage
    102,633
    Service Date
    3/19/2021
    Services Performed
    • Includes: Change engine oil and filter. Check transmission fluid level and adjust as needed. Check coolant condition and pressure check system. Check brake fluid level and condition. Check power steering fluid level and condition. Check belts; coolant, fuel, and vacuum hoses for damage/degradation. Check antenna operation (if applicable). Lube all doors and latches. Tighten door brake fasteners. Lube hood hinges and latch. Check differential fluid level. Check axle boots, CV joints, and/or U-Joints for damage. Check wheel bearings for play. Check parking brake operation. Check for fluid leaks. Check interior and exterior lights. Check wiper and washer jet operation. Check tire wear and condition. Set tire pressures to specification. Vacuum cowl. Check intake and cabin air filters. Test drive vehicle.
    • Removed intake piping from engine. Disconnected and cleaned wiring harness of coolant residue. Removed retainer clip and sensor assembly. Checked sensor fitting for any marks or damage, ok. Installed new sensor and o-ring. Installed new retaining clip and reconnected wiring. Filled and bled cooling system. Test drove vehicle and rechecked for any leaks. No leaks present at this time.
    • Removed upper engine cover and cowl panel to access auxiliary pump. Moved wiring and hoses to access auxiliary coolant pump inlet hose. Loosened clamp and moved it to proper location on hose and pump fitting. Retightened clamp. Reassembled engine hoses and wiring. Pressure tested system after both coolant repairs were completed. No leaks present at this time.
    • Removed vacuum hose assembly from vacuum pump and check valve to brake booster. Installed new line and reconnected to both fittings. Checked routing for any interference or tension on joints, all ok.
    • Replace cabin filter element. Reassemble filter housing and access panels.
    • Replace engine air filter.
     
    Bart F. gave our service a 5 star review on 3/19/2021

  • 2015 Audi Q5

    Audi Q5
    Mileage
    76,450
    Service Date
    2/3/2021
    Services Performed
    • Includes: Change engine oil and filter. Check transmission fluid level and adjust as needed. Check coolant condition and pressure check system. Check brake fluid level and condition. Check power steering fluid level and condition. Check belts; coolant, fuel, and vacuum hoses for damage/degradation. Check antenna operation (if applicable). Lube all doors and latches. Tighten door brake fasteners. Lube hood hinges and latch. Check differential fluid level. Check axle boots, CV joints, and/or U-Joints for damage. Check wheel bearings for play. Check parking brake operation. Check for fluid leaks. Check interior and exterior lights. Check wiper and washer jet operation. Check tire wear and condition. Set tire pressures to specification. Vacuum cowl. Check intake and cabin air filters. Test drive vehicle.
    • Removed engine covers to access exhaust manifold. Disconnected oxygen sensor harness and moved wiring. Removed oxygen sensor from exhaust manifold. Installed new sensor assembly and torqued to spec. Reconnected sensor wiring harness. Test started vehicle and checked live data. Sensor now reading properly. Reinstalled engine covers. Cleared codes and test drove vehicle. No codes stored or pending after test drive. Checked emissions monitors. Cat monitor and evap have not set yet. Test drive vehicle in the morning to finish setting monitor.
    • Removed retaining bolt and disconnected electrical wiring from rear bumper light assembly. Installed new light and reconnected wiring. Tested light operation, all ok.
    • Replace wiper blades on vehicle.
    • Scanned vehicle to check for codes. Found code stored for Bank 1 Sensor 1 Oxygen Sensor fault. Cleared codes and rescanned, fault returned immediately. Checked live data on scan tool. Found sensor not reading. Checked sensor and wiring, all ok. Recommend new sensor.
     
    SUZY C. gave our service a 5 star review on 2/5/2021

  • 2011 Audi Q5

    Audi Q5
    Mileage
    90,278
    Service Date
    10/6/2020
    Services Performed
    • Includes: Change engine oil and filter. Check transmission fluid level and adjust as needed. Check coolant condition and pressure check system. Check brake fluid level and condition. Check power steering fluid level and condition. Check belts; coolant, fuel, and vacuum hoses for damage/degradation. Check antenna operation (if applicable). Lube all doors and latches. Tighten door brake fasteners. Lube hood hinges and latch. Check differential fluid level. Check axle boots, CV joints, and/or U-Joints for damage. Check wheel bearings for play. Check parking brake operation. Check for fluid leaks. Check interior and exterior lights. Check wiper and washer jet operation. Check tire wear and condition. Set tire pressures to specification. Vacuum cowl. Check intake and cabin air filters. Test drive vehicle.
    • Replace cabin filter element. Reassemble filter housing and access panel.
     
    CAROL W. gave our service a 5 star review on 10/6/2020

  • 2015 Audi Q5

    Audi Q5
    Mileage
    68,292
    Service Date
    6/16/2020
    Services Performed
    • Includes: Change engine oil and filter. Check transmission fluid level and adjust as needed. Check coolant condition and pressure check system. Check brake fluid level and condition. Check power steering fluid level and condition. Check belts; coolant, fuel, and vacuum hoses for damage/degradation. Check antenna operation (if applicable). Lube all doors and latches. Tighten door brake fasteners. Lube hood hinges and latch. Check differential fluid level. Check axle boots, CV joints, and/or U-Joints for damage. Check wheel bearings for play. Check parking brake operation. Check for fluid leaks. Check interior and exterior lights. Check wiper and washer jet operation. Check tire wear and condition. Set tire pressures to specification. Vacuum cowl. Check intake and cabin air filters. Test drive vehicle.
    • Replace cabin filter element. Reassemble filter housing and access panels.
    • Replace engine air filter.
    • Rotate Tires
    • Scanned vehicle for codes. Found codes stored for circuits open and resistance implausibility for bank 1 sensor 1 air fuel ratio sensor. Inspected sensor, wiring is ok. Checked live data with vehicle running, sensor is not reading properly. Cleared codes and retested system, codes returned immediately and sensor is not working properly. Recommend replacement of air fuel ratio sensor.
     
    SUZY C. gave our service a 5 star review on 6/17/2020